Advertisement
Specifications
Power output into 4 or 8 ohms • 60 watts
Bandwidth • -3 dB 6 Hz - 33 kHz
Class of operation • Class A single-ended balanced 845 triode
Input level for 30 watts output • 150 mV rms
Signal to Noise Ratio re 1 watt out • 100 dB A weighted
Distortion at 1 watt / 1 kHz • <0.05% predominantly 2nd harmonic
Damping Factor • 3 across full bandwidth
Input configuration and impedance • 100K ohm single ended/balanced
Gain at 8 ohm tap • 20 dB
Power Requirement • 110-120 / 220-240 VAC; 50-60 Hz
• 400 VA per chassis
Voltage settings are made at our facility to correspond to requirements of the country in which
the product is shipped.
Size • 19.5" W x 15" D x 11" H each (496 mm x 381 mm x 280 mm)
Weight • 80 lbs each (36.3 kg)
Service
Under normal operation the fuse should not need replacing. There is one standard 1/4" x 1" fuse.
Remove the power cord before changing the fuse. Contact your dealer if assistance is needed.
Orfeo 60
Page 10
Owner's Manual
Advertisement
