Table of Contents
Advertisement
4. Using Figure 2 and Figure 4 as guides, connect one end of a coax cable
(Cable "B") to one of the OUT connectors on the cable splitter. Tighten the
connector with 7/16 inch wrench.
5. Connect the remaining end of Cable "B" (TV Cable) to the same TV, Con-
verter Box, or VCR.
6.
Again, using Figure 2 and Figure 4 as guides, connect one end of coax Cable
"A" (Data) to the remaining OUT connector on the cable splitter. Tighten the
connection with a 7/16 inch wrench.
7. Remove your new MTA modem from its box and place it near your computer.
8. Connect the remaining end of coax Cable "A" (Data) to the RF connector on
the modem as shown in Figure 5. Tighten the connection with a 7/16 wrench.
Terayon TA-102 and TA-202 MTA Modem Installation Guide
MULTIMEDIA TERMINAL ADAPTER MODEM
Figure 5 Connecting the RF Cable to the Modem
Connecting the Modem
TERAYON
MODEL TA-102 or TA-202
RF CONNECTOR
COAX CABLE
FROM CABLE SPLITTER
(CABLE "A")
7
Advertisement
Table of Contents
