Connecting A Battery Backup Unit To The Modem - Terayon TA-102 Installation Manual

Connecting the Modem

Connecting A Battery Backup Unit to the Modem

If you are going to use an optional Battery Backup Unit to power your new
modem instead of the Power Adapter that came with the modem, follow these
steps:
1. Remove the Battery Backup Unit from its shipping container, then follow the
installation instructions that came with the unit.
2. Locate the Battery Backup Unit DC Output plug.
3. Using Figure 8 as a guide, align the key groove on the DC Output plug with
the key slot in the DC Power Input jack on the back of the modem.
4. Push the plug into the jack so the cable is firmly connected
TERAYON
MULTIMEDIA TERMINAL ADAPTER MODEM
MODEL TA-102 or TA-202
BATTERY BACKUP UNIT
DC OUTPUT PLUG
TO BATTERY
BACKUP
DC POWER
UNIT
INPUT JACK
Figure 8 Connecting a Battery Backup Unit to the
Modem
IMPORTANT: Do not turn the Battery Backup Unit On at this
time.
Terayon TA-102 and TA-202 MTA Modem Installation Guide 9