Connecting the 10/100 Base-T Ethernet Cable
To connect the 10/100 Base-T Ethernet cable, follow these steps:
1. Retrieve the 10/100 Base-T Ethernet cable from the box the modem came in.
Use Figure 1 on page 2 to identify the cable.
2. Using Figure 9 as a guide, connect one end of the 10/100 Base-T Ethernet
cable to the RJ-45 Ethernet port on the back of the modem.
3. Connect the remaining end of the 10/100 Base-T Ethernet cable into the RJ-
45 Ethernet port on the Ethernet Interface Card as shown in Figure 10.
4. If you are going to connect a telephone to the modem, proceed to "Connect-
ing A Telephone to the MTA Modem" on page 15. If not, proceed to "Starting
the Modem" on page 16.
Terayon TA-102 and TA-202 MTA Modem Installation Guide
MULTIMEDIA TERMINAL ADAPTER MODEM
TO ETHERNET PORT ON COMPUTER
Figure 9 Connecting the Ethernet Cable to the Modem
Connecting the Modem
TERAYON
MODEL TA-102 or TA-202
RJ-45 ETHERNET PORT
10/100 BASE-T
ETHERNET CABLE
11