Initial Setup; Physical Connections - Axia IQ Quick Start Installation Manual

INITIAL SET UP

PHYSICAL CONNECTIONS

1. Connect the end of the provided 6-pin Molex cable without the strain relief to the Molex port (A)
on the underside of the iQ Main Frame.
2. Connect the other end of the 6-pin Molex cable to the Console 1 port (B) on the QOR.32 unit.
3. Connect a microphone to MIC 1 (C).
4. Connect an analog stereo source to IN 1 (D) (preferably a professional line level source).
5. Connect powered speakers or speaker amplifier to OUT 2 (E).
6. Connect headphone amplifier to OUT 1 (F).
7. Connect the QOR.32 to AC Mains (G) using the supplied power cable.
8. Connect Ethernet cable to the 100 Mbps Ethernet port (H) (marked 100BT) on the QOR.32,
connect other end directly to the Ethernet port (I) on a PC.