Axia IQ Quick Start Installation Manual page 6

OUTPUT AND SOURCE CONFIGURATION
1. Remain logged in to the QOR Control Center.
2. In the QOR Control Center navigation in the left
column under IO Manager, click "Outputs" (A) to
view the Outputs screen (B)
3. Enter the name "Headphones" in the name field
column (C) for Analog 1.
4. In the Output column (D), click the dropdown menu
for Analog 1 and select "CR Headphones". Click the
"Apply" button (E).
5. Enter the name "Monitor Spkrs" in the name field
column (C) for Analog 2.
6. In the Output column (D), click the dropdown menu
for Analog 2 and select "CR Monitor".
7. In the QOR Control Center navigation in the left
column under Profile Manager, click "Sources" (F).
8. Click the "Create" button (G). (Note, the dropdown
menu (H) to the right of the Create button should
remain at its default value of "Line Input".)
9. An expanded new Source Profile screen will open (I).
10. Enter "1 kHz Tone" in the Source Name field (J).
11. Select the "Sine 1 kHz – 20dBFS" option from the
Source input dropdown menu (K).
12. Click the "OK" button (L).
13. Click the "Create" button (G) again. (Note, the
dropdown menu (H) to the right of the Create button
should remain at its default value of "Line Input".)
A
G
F
G
C D
E
H
J
K
H
B
I
L