Initializing Settings - Samsung SNR-6400 User Manual

Network Video Recorder SNR-6400/3200
When pressing Enter, the following messages appear while the firmware is being updated.
Once the update process is complete, the system automatically reboots itself. To move back to
a previous phase, press ESC. To cancel the update and move back to the main screen, hold
down ESC for 2 seconds or longer.
System Update
is in Progress...
System will reboot
after 5 seconds
Rebooting system
is in Progress...
If a USB flash drive is not inserted into the product back panel USB terminal, the following
error message appears.
There's no usb stick
Check usb please...
If a USB flash drive is inserted, but does not contain a firmware update file, the following error
message appears.
No f/w file in usb
Check usb please...

5.1.5. Initializing Settings

Under System, select 5. Factory Reset, and then press ENTER. A message appears on the
display prompting you to confirm that you wish to reset all configurations to their defaults.
Warning! All actions
Will be stopped
Are you sure?
Yes: Enter No: Esc
Upon pressing Enter, the following messages appear while settings are being initialized. When
initialized, the system reverts to the factory default settings. To move back to a previous phase,
press ESC. To cancel the initialization and move back to the main screen, hold down ESC for 2
seconds or longer.
Factory reset
is in Progress...
System will reboot
after 5 seconds
78