Monitor
You can set the information displayed on the monitor as well as the output system.
Monitor settings
You can configure the monitor output-related settings including the displayed information, dwell time and output
system.
[MENU] ▼ <Device> ►▼ <Monitor> [ENTER] ▲▼◄► [ENTER]
• Event Display : Sets the dwell time of the event channel display on the monitor when an event occurs.
If selected <Continuous>, it displays the channel until you press [ALARM] button to release it.
• Display : Displays only checked items on the monitor screen.
• Multi CH SEQ Time : Sets the interval between automatic display switching in 4-split and 9-split mode of the
Live screen.
• Video Output : Select a video output type from <VGA> and <HDMI>.
Only either one of <VGA> and <HDMI> will be output.
If your selection of <VGA> or <HDMI> does not match with the monitor setting, the video may not be output.
Move to [STOP]
[ZOOM]
where you can change the resolution as you want.
`
If the changed resolution is not supported by the monitor, the video may not be displayed properly. If this is the case, the screen
will restore the default resolution after a certain time. Then, you can change it to a different resolution.
M
`
Specify the event display time and dwell time in consideration of the video delay depending on the network environment.
[STOP]
[ZOOM] and press [MENU] to display the default resolution dialog
English _59