Table of Contents
Advertisement
5.4. Removing HDDs
On the main screen, press ∧ and ∨ to move to the following screen, and then press Enter.
4. Remove HDD
[SET]
The screen shown below appears where you can use ∧ and ∨ to select the HDD to remove.
HDD Number to remove
Internal HDD? [1]
HDD Number to remove
External Bay? [1]
Select the number for an internal HDD or an external HDD bay, and then press Enter. Upon
pressing Enter, the following messages appear while the selected HDD is being removed.
Executing...
Please Wait!!!
Remove Int HDD[1]
[DONE]
Remove Ext Bay[1]
[DONE]
Once the [Done] message appears, you may physically remove the HDD from the product.
When selecting an HDD that is not available or connected, the following message appears.
Internal HDD[1]
is empty!!
External Bay[1]
is not connected!!
Check HDD to Remove
Please Try Again
The number for an internal HDD or external HDD bay is determined depending
on which product port that you connect to. Available numbers are 1, 2, 3, and 4
Note
from the upper left and right to the bottom left and right. Please Refer to "Chapter
2. Part Names"(Page 11)
89
User's Manual
- Quick Links:
- Back Panel
Hide quick links:
Advertisement
Table of Contents
