System; Checking Firmware Version; Turning On/Off Beep - Samsung SNR-6400 User Manual

Network Video Recorder SNR-6400/3200

5.1. System

On the default LCD screen, press ∧, ∨ to move to the screen shown below and press
ENTER.
1. System
[SET]
Sub-menus will appear where you can use the ∧, ∨ buttons to navigate.
1. Firmware Version
2. Key Beep On/Off
3. Relay off
4. System Update
5. Factory Reset
6. Test HDD
7. System Power Off

5.1.1. Checking Firmware Version

Under System, select 1. Firmware Version, and then press Enter. The current firmware version
of the system displays as shown in the illustration below.
Below is a sample picture provided for your reference; the firmware version differs depending on the
model.
Firmware Version
0.1.4-090309

5.1.2. Turning On/Off Beep

You can turn the beep of the front panel buttons on or off using this menu item.
Under System, select 2. Key Beep On/Off, and then press ENTER.
1. On
2. Off
Selecting "1. On" and pressing Enter turns on the beep. Selecting "2. Off" and pressing Enter
turns off the beepIn each case, the following messages appear.
Key Beep is On!
Key Beep is Off!
76