Usb; Connecting To The Website; Connecting Cable; Adding An Ip Address - Samsung SNR-6400 User Manual

Network Video Recorder SNR-6400/3200
RELAY OUT 2
Normal Close
Common
Normal Open
For detailed instructions on connecting the relay output, please refer to "4.6.3. Event Setup"
(Page 44)

3.1.7. USB

The USB ports on the rear panel are used to upgrade the product's firmware with the buttons
on the front panel. Please refer to "5.1.4. System Update "(Page 77)

3.2. Connecting to the Website

3.2.1. Connecting Cable

Press PUSH on the front panel to open the Locking Door, then connect a PC to the Front
Panel Network Port with the supplied crossover cable as shown in the illustration below. (When
using a hub to connect the product to a computer, you may use a normal LAN cable instead of
a cross-over cable.)

3.2.2. Adding an IP Address

In your computer, click Start > Control Panel > Network Connections > Local Area Connection
> Properties.
NC
O
-
-
26
CM
O
O
O
NO
-
-
O