Samsung SNK-D85121BF User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Network Hardware
  5. SNK-D85121BF
  6. User manual

Samsung SNK-D85121BF User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

NETWORK VIDEO RECORDER
User Manual
SNK-D85121BF

Advertisement

Table of Contents
loading

Related Manuals for Samsung SNK-D85121BF

Summary of Contents for Samsung SNK-D85121BF

  • Page 1 NETWORK VIDEO RECORDER User Manual SNK-D85121BF...

  • Page 2: Table Of Contents

    Overview of NVR Contents overview of nvr Contents Safety Instruction Get Close to nvr Front Panel Back Panel Remote Controller Install Hard Drive Connect external equipment Connect Camera Connect NVR How to assemble the waterproof RJ-45 coupler Cable Protection Installing the camera nvr Boot up System Initialization Startup Wizard...

  • Page 3: Safety Instruction

    sAfety instruCtion Please carefully read the following safety instruction so as to avoid personal injuries and prevent the equipment and other connection devices from being damaged. 1. Please use the power supply enclosed or specified by the manufacturer. Never operate the equipment by using unspecified power supply. 2.

  • Page 4: Front Panel

    Get Close to NVR front pAnel NVR is the abbreviation of Network Video Recorder. snr-d5401 DV25 NETWORK VIDEO RECORDER SRN-475S Key or LED Identification Functions When the indicator lamp turns on in green color, it means that the NVR is powered Power indicator lamp normally.
  • Page 5 BACk pAnel snr-d5401 LAN15 LAN13 LAN11 LAN9 LAN7 LAN5 LAN3 LAN1 AC 100 240~IN e-SATA USB 3.0 CAUTION LINEIN AUDIO OUT RISK OF ELECTRI SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE.

  • Page 6: Remote Controller

    Get Close to NVR reMote Controller Operation of remote controller Channel select Numeric key Numeric key Menu Enter into Main menu/Exit Multiple display mode suBMenu Go to Submenu Up arrow key Select key/Edit key Left/Right key; Decrease/Increase parameter value of control bar.

  • Page 7: Install Hard Drive

    instAll HArd drive Do not remove the hard drive when NVR is operating. installation of Hard drive 1. When power supply is disconnected, remove the screws at both sides with screwdriver, then remove the screws on the rear board, and then remove top cover of NVR. 2.

  • Page 8: Connect External Equipment

    Get Close to NVR ConneCt externAl equipMent Connect the cameras to the NVR via the network cables. If you choose not to power the cameras via the LAN ports, be sure to use a 12V power adapter for power each camera. Connect your monitor to the NVR using a VGA or HDMI cable to its respective port.

  • Page 9: Connect Nvr

    ConneCt nvr The following figures are based on Model SNR-D5401. How to AsseMBle tHe wAterproof rJ-45 Coupler The following figures are based on Model SNR-D5401. Waterproof rubber gasket(Female) RJ45 male connector Fastening rubber gasket (male) Fastening back cover RJ45 female modular jack(mold) RJ45 connector protector cap English _9...
  • Page 10 Get Close to NVR 1. Insert the LAN cable through each component as shown below: Fastening back cover -> Fastening rubber gasket -> RJ45 connector protector cap * (Caution) Gasket direction RJ45 connector protector cap RJ45 male connector Waterproof rubber gasket (Female) Connect the RJ45...

  • Page 11: Cable Protection

    CABle proteCtion 1. As there may be direct leakage to the external cables when installed outside, please use waterproof butyl rubber tape to protect the cables. 2. Wrap the cable jacket (Area A) and the cable connectors with waterproof (butyl rubber) tape so that more than half of the butyl rubber tape is tightly overlapped.

  • Page 12: Nvr Boot Up

    NVR Boot up systeM initiAlizAtion After connecting the NVR power cable to the wall outlet,press the power button and the theinitializing screen will appear. The illustration in the user manual may not be the same as the menu interface in your monitor.
  • Page 13 3. network setup In DHCP mode, the router will automatically allocate IP address to the NVR. If the NVR fails to obtain an IP address, refer to the NVR Router Guide. If the problem still cannot be resolved, contact technical support. 4.
  • Page 14 NVR Boot up 7. email setting Receive or Send NVR alarm email and set parameters like email address, SSL, email enable, and interval. • encryption: Disable, SSL, TLS and Auto optional. Auto means it can detect the encryption type automatically. It is recommended to set the encryption type as Auto.

  • Page 15: Main Interface

    MAin interfACe When there is no HDD pre-installed or pre-installed HDD is not formatted, buzzer will be activated. If you want turn off the buzzer, please go to [Advanced -> Events -> Disk Full or Disk Error] to set the buzzerto ‘Off’. English _15...

  • Page 16: Nvr Menu

    NVR Menu popup Menu After finishing system initialization, right click the mouse topreview interface or slide the mouse to the bottom of screen to enter into Pop-up Menu. Now you could perform parameter setting and operate on Main Menu, Multi-Pics, Record Search, Sequence and Stream switching.

  • Page 17: Main Menu Guide

    MAin Menu Guide IP Channels Live Output Display Image control Privacy Zone Record Record Schedule Mainstream Record Substream Mobliestream Parameter Network Switch Email Network Email Schedule DDNS RTSP Alarm Motion General Record Search Events Main Menu Device General General Users System Info Info...

  • Page 18: Main Menu

    NVR Menu MAin Menu On LIVE mode, click the mouse button, or [Menu] button on the remote controller, or click [ ] icon on the toolbar to enter the main menu screen. If system interface is locked, please enter the password to log in. If you forgot your password, please contact technical support.
  • Page 19 live Go to "Main Menu" ; "Parameter" ; "Display" ; "Live" to enter into the interface. • Channel: Select channel number. • Channel name: Name marked on IPC. • show name: Enable or Disable display channel name. • show time: Enable or Disable display time. • date format: Set date format such as m/d/y or y/m/d and d/m/y.
  • Page 20 NVR Menu image control Go to "Main Menu" ; "Parameter" ; "Display" ; "Image control" to enter into the interface. You can configure some settings of IPC, such as white balance, 3D noise reduction and image reversal etc. privacy zone Go to "Main Menu"...
  • Page 21 record record Go to "Main Menu" ; "Parameter" ; "Record" ; "Record" to enter into the interface. • Channel: Set the desired channel in the drop-down menu. • record: Set up the record status (Enable/Disable) of each channel. • stream Mode: Select Mainstream or DualStream. • prerecord: “Enable”...
  • Page 22 NVR Menu network network Go to "Main Menu" ; "Parameter" ; "Network" ; "Network" to enter into the interface. Select the type of network connection (PPPoE, DHCP, Static) and set Port, then user may remotely control the monitoring, recording, playback or backup of the NVR through the network. For PPPoE, Static and DHCP, after setting IP address of NVR, the extranet port shall be mapped on the router before visiting NVR through public network.
  • Page 23 e-mail Go to "Main Menu" ; "Parameter" ; "Network" ; "Email" to enter into the menu interface. Receive or Send NVR alarm Email and set parameters like Email address, SSL, Email Enable, and Interval. • encryption: Disable, SSL, TLS and Auto optional. Auto means it can detect the encryption type automatically.
  • Page 24 NVR Menu ddns Go to "Main Menu" ; "Parameter" ; "Network" ; "DDNS" to enter into the menu interface. User may set DDNS in any one of the above 3 network connection types after applying dynamic domain service. User may remotely access the NVR through domain by using browser in the form of http://applied domain: mapped HTTP port number.
  • Page 25 Alarm Motion Go to "Main Menu" ; "Parameter" ; "Network" ; "Motion" to enter into the interface. • Channel: Enable or disable Motion function. • enable: Enables the use of a switch. • sensitivity: Support 1-8 level, 8 is the highest level. • Buzzer: When detecting object moving, an alarm is turned on (disable, 10 seconds, 20 seconds, 40 seconds and 60 seconds).
  • Page 26 NVR Menu record search record search Go to "Main Menu" ; "Record Search" ; "Record Search" to enter into the interface. • Channel: Select the channel you want to search. • type: Select the type the playback record. There are three options, All， Normal and Motion.
  • Page 27 time Axis setup, file clip and zoom in/out The NVR supports the processing control bar function when playing back record files • time Axis zoom: Default value is 24hours. Allow user to select 2 hours, 1 hour, 30 minutes. detailed operation Fixed time axis: If you select [ ] option, that means the processing control bar covers two-hour ofcontent.
  • Page 28 NVR Menu record search event search Go to "Main Menu" ; "Record Search" ; "Event Search" to enter into the interface. In this page, user may search details by date, time, channel and record type. The relevant operations are as follows: : Click the button to go to previous page when viewing events (except the •...
  • Page 29 play Backup files 1. Copy backup files to the computer. 2. Open SVideo player and click [ + ] or [ For example, if you want to choose *.rf, *.avi, *.mp4, add backup file and select a file to play. Play: Click to play file Pause: Click to pause.
  • Page 30 NVR Menu device Go to "Main Menu" ; "Device" ; "HDD" to enter into the interface. When NVR is connected to a HDD, the system will automatically detect if the HDD is normal or not; if the HDD needs to be formatted, status will be shown as “Not formatted”.
  • Page 31 system General General Go to "Main Menu" ; "System" ; "General" ; "General" to enter into the interface. User may set Date, Time, Date Format, Time Format, Language, Video Format, Menu Timeouts and Show Wizard in this page. Go to "Main Menu" ; "System" ; "General" ; "DST" to enter into the interface. Enter into the interface set DST, Time Offset, Start Time and End Time.
  • Page 32 NVR Menu users Go to "Main Menu" ; "System" ; "Users" to enter into the interface. It supports up to seven users, including one administrator and six users. Click [edit] button to enter into the [user edit] interface to input user name and password.
  • Page 33 info info Go to "Main Menu" ; "System" ; "Info" ; "Info" to enter into the interface. User can view system information, including Device ID, Device Name, Device Type, Hardware Version, Software Version, IE Client Version, IP Address/ Domain, MAC Address, HDD Capacity, Video Format, Media Port, Web Port, P2P ID, etc.
  • Page 34 NVR Menu Advanced Maintain Go to "Main Menu" ; "Advanced" ; "Maintain" to enter into the interface. • Auto reboot: Enable the auto maintenance function to reboot system regularly at every day/week/month. When Auto Reboot is enabled, the NVR should be in the main interface and no user operation. • upgrade: Decompress update file package and copy the upgrade file folder named “nvrupgrade”...

  • Page 35: Menu Lock

    events Go to "Main Menu" ; "Advance" ; "Events" to enter into the interface. • event type: Support three abnormal types: Disk Full, Disk Error and Video Loss. • enable: Active alarms for abnormal situations. • show Message: You can set show message on the screen when sensor alarm is detected.

  • Page 36: Split Mode

    NVR Menu split Mode There are many display modes in video channel, including single channel display, SEQ display and split mode. streAM switCH Click [ ] to switch to Sub Stream, Click [ ] to switch to Main Stream. When you switch to 16 channels live view mode, you can only view 12 channels at Main Stream.

  • Page 37: Web Application Manager

    Web Application Manager downloAd And instAllAtion of pluGin If your computer system is Windows 7, you may need to setup the user authority for remote control, or you may be unable to backup or record. Vista System: Start ; Setup ; Control Panel. Set user authority in control pane shown as the following picture. Remove the Tick “√” in front of the option “Use UAC to help protect your computer”...
  • Page 38 Web Application Manager download and installation of plugin for ie Open your web browser and input the IP address of NVR, such as: http://192.168.1.200:80 . Click on "download", and then click on "Run" in being downloaded File - Security Warning box” Click on "Run"...
  • Page 39 download and installation of plugin for Mac sAfAri Enter IP address of NVR in address bar of Mac SAFARI, for example, http://192.168.1.200, and click on “download” to download the plugin. Locate the downloaded plugin "WebPluginN.dmg" and double click on it Install the plugin by double clicking on "webpluginN.pkg".

  • Page 40: Web Application Manager Login

    Web Application Manager weB AppliCAtion MAnAGer loGin After plugin installation, please input user name and password, select Sub Stream or Mobile Stream (In general, selectSubStream for intranet and MobileStream for extranet.), and select language in the interface. There is an option for opening all channel preview, select it to open all live pictures. Press Login to log in client and visit NVR remotely.
  • Page 41 video Control Hue: Adjust the hue of video. Bright: Adjust the brightness of video. Contrast: Adjust the contrast of video. Saturation: Adjust the saturation of video. playback Click [ ] to enter into Playback interface to remotely view the records in NVR HDD. It supports 4 channels playback.
  • Page 42 Web Application Manager Secondly, select record type (Normal record, Motion record and All) and channels, and then click [ ],and time axis panel will display specific time quantum. On the time axis, green part stands for normal record, yellow stands for motion record and original part stands for no record during this period.
  • Page 43 record file clip After opening playback, click [ ] icon to clip the selected file; and click again to stop the clip function. Then playback clip is successfully done. Record clip file will be saved as *.rf format. Capture function Move the mouse curse to the channel you want to capture, and click ] icon to capture the live images remotely.
  • Page 44 Web Application Manager live You may change channel name, position, channel preview and relevant parameters. If show time is set as <disable>, current NVR system time will not appear on the screen on Live mode. image Control The IPC some remote settings such as white balance, 3d noise reduction image reversal and so on.
  • Page 45 record Click <Record> option to unfold its sub-options: Record parameter, Schedule and Stream configuration. record parameters The parameters should be consistent with NVR local setting. record schedule The parameters should be consistent with NVR local setting. Green stands for Normal record. Yellow stands for Motion detection. stream setting User may set Mainstream, Substream and Mobilestream.
  • Page 46 Web Application Manager network Unfold <Network> to show its sub-options: Network, Email, and DDNS configuration. lAn setting NVR supports Static/DHCP/PPPoE modes. System default network type is <dHCp>. User can set parameters as required. After the network parameters are modified successfully, NVR will automatically restart. email Set NVR alarm Email configuration parameters, including Email address, SSL, Email Enable, Interval and Email Schedule, etc.
  • Page 47 rtsp Go to “Main Menu” ; “Parameter” ; “Network” ; “RTSP”. Set User Name and Password to view video by PC software VLC • rtsp enable: Enable/Disable • verify: Enable/Disable • rtsp port: 554 • instruction:rtsp: //IP:Port/chA/B • A: 01(ch1), 02(ch2)... • B: 0(main stream),1(sub stream) User name and password of RTSP is same as system.
  • Page 48 Web Application Manager system Click <system> option to unfold its sub-options: General, Users and information. General User may check NVR language and video system and set system time, date format, menu display time, DST and NTP parameters. Detailed setting should be consistent with NVR local setting.
  • Page 49 Advanced Click Advance to unfold its sub-options: Firmware Update, Load default, Events and Maintain. firmware update User may remotely update NVR system. updating procedure Firstly, select the update file path. The file format is *.sw. Secondly, click “Start” to start updating. The updating progress can be seen on the screen.After firmware is upgarded, please restart the browser and enter IP address and HTTP port of the NVR to log in remotely.
  • Page 50 Web Application Manager events User may configure Event Type, Buzzer, Send Email, Show Message and other parameters. Detailed setting should be consistent with NVR local setting. Maintain Allow you remotely set auto maintain time for NVR. Detailed setting should be consistent with NVR local setting.

  • Page 51: Mobile App

    Mobile App Android pHones/tABlets 1. Open Play Store to search WiseView and click ‘INSTALL’ to install. 2. After installation, open WiseView and select ‘Device’. Then click [ ] to add new device. Scan QR code under Information page of system on local NVR. Then input client port, user name and password, and then click Save to log in the device.

  • Page 52: Iphone/Ipad

    Mobile App ipHone/ipAd 1. Open App Store to search WiseView, and click icon [ ] to install. 2. Open WiseView, and go to Device. Click [ ] to add new device. Scan QR code under Information page of system on local NVR.

  • Page 53: Appendix

    Appendix trouBlesHootinG Symptom Countermeasures • Check if the power supply system is properly connected and data cord and power cables are securely What can I do if the system does not detect connected, and if something wrong with the HDD interface. Or you may check if your HDD is supported the HDD? by referring to the specifications or descriptions.
  • Page 54 Appendix usage Maintenance 1. To shut down NVR, please firstly shut down the system and then turn off the power. Do not turn off the power directly or HDD data will be lost or damaged. 2. Please keep NVR away from heat sources or places. 3.

  • Page 55: Specifications

    speCifiCAtions CAMerA - snC-4241Be Item Details Video Imaging Device 4M CMOS (1/3") Effective Pixels 2592x1520 Scanning System Progressive Synchronization Internal Horizontal Resolution 1520 Min. Illumination 0.62Lux (30IRE);1.28Lux (45IRE) In Color Mode Camera Output RJ45 Lens Focal Length 3.6mm Max. Aperture Ratio F2.1 Angular Field of View(H / V / D) D:94°/H:77.5°/V:43.4°...
  • Page 56 Appendix nvr - snr-d5401 Item Details Description Inputs 16CH Video Resolution 4M / 3M / 1080P/720P Frame rate 4M@240fps, 3M@330fps, 1080P@480fps Resolution 1,024x768, 1,280x720, 1,280x1,024, 1,440x900, 1,920x1,080, 2,560x1,440, 3,840x2,160 Live [Local Monitor] 1/4/6/8/9/10/12/13/14/16 Sequence Multi Screen display [Web] 1/4/6/8/9/10/12/13/14/16 Sequence Performance Embedded Linux...
  • Page 57 Item Details Microsoft Internet Explorer (Ver. 8~11), Mozilla Firefox (Ver. 51.x or lower), Web / App viewer Google Chrome (Ver.44.x or lower), Apple Safari (Ver. 5.1 or higher) (Mac OS X 10.9 or higher) Smart phone Protocol support TCP/IP, UDP/IP, UDP, P2P Transmission speed VGA(640x480),QVGA(320x240) Max.20fps (Single channel) Max.

  • Page 58: Dimension

    Appendix diMension CAMerA Unit: mm (inch) 58_ Appendix...
  • Page 59 Unit: mm (inch)
  • Page 60 Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
  • Page 61 Head Office 6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Rep. of KOREA Tel : +82.70.7147.8753 Fax : +82.31.8018.3740 www.hanwha-security.com Hanwha Techwin America 500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666 Toll Free +1.877.213.1222 Direct +1.201.325.6920 Fax +1.201.373.0124 www.hanwha-security.com Hanwha Techwin Europe Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom...

This manual is also suitable for:

Snr-d5401Snc-4241be

Table of Contents