External Hdd - Samsung SNR-6400 User Manual

⑨ When adding a new, unformatted HDD, the product automatically formats the HDD.
Formatting HDD
is in Progress...
displaying the formatting process in the front LCD.
Internal HDD [2]
Added successfully!
Upon completing the formatting process, the message above is displayed in the LCD
along with a blue indicator in the HDD LED, indicating that the new HDD is ready to
use.
For a list of compatible HDDs, please refer to "※ Recommended HDDs"(Page
95)
Note
Do Not remove an HDD while the product is in operation. To safely remove
HDDs, please refer to "5.4. Removing HDDs"(Page 89)
Caution
To lock the HDD door, please make sure to turn Key Lock clockwise
completely.
Caution

3.1.4. External HDD

The SNR-6400/3200 supports an eSATA interface for connecting external storage devices; four
eSATA ports are located on the rear panel. The product can have up to 20 TB of storage
capacity by utilizing the internal HDDs and eSATA ports. (Based on 1TB data capacity per
HDD.)
An external eSATA HDD can be connected to the eSATA port on the rear panel as shown on
the next page. Note that an eSATA port does not supply power to the device connected to it;
the external device must supply its own power.
23
User's Manual