Repeat the steps to enter the ending IP address for the range.
Use DHCP Server?
Yes: Enter No: Esc
Pressing Enter moves to the next screen, as the new DHCP Server settings are being
saved. To move back to the previous phase, press ESC. To cancel the new settings and
move back to the main screen, hold down ESC for 2 seconds or longer.
Server Mode Setup
[DONE]
5.2.3. Storage Ethernet Port Setup
The Storage Ethernet Port is used for communication between the product and NAS.
Under Network Setup, select 3. Use Storage Ethernet Port, and then press ENTER.
1. Use Static IP
2. Use DHCP (Client)
3. Use PPPoE
Use one of the 3 options to set an IP address for Source Ethernet Port. For detailed
instructions on the port setup, please refer to Static IP, DHCP Client, and PPPoE setups
under "5.2.1. Monitor Ethernet Port Setup"(Page 81)
85
User's Manual