Hdd Check - Samsung SNR-6400 User Manual

Rebooting system
is in Progress...
For more information about the default settings value, please refer to "2.3. Default
Settings"(Page 14)
The Factory Reset does not reset the RAID settings of the system or delete data
saved in the HDDs.
Note

5.1.6. HDD Check

Under System, select 6. Test HDD, then press Enter. The following messages appear asking
you to select an HDD to check.
HDD to examine
Internal HDD? [1]
HDD to examine
RAID PARTITION? [1]
Selecting an HDD displays a message asking if you really want to perform disk-checking for
the selected HDD.
Record on this HDD
will be stopped
Are you sure?
Yes: Enter No: Esc
When pressing ENTER, the following message appears as the disk-checking process is
initiated. Once the process is complete, the screen displays the check results.
Executing...
Please Wait!!!
Examining Int HDD[1]
is in Progress...
Examining Int HDD[1]
[DONE]
HDD test result:
0 bad block
The check results stay on the screen until you click a button.
79
User's Manual