Technical Support - Elan V8 Installation Manual

E L A N H O M E S Y S T E M S
Symptom
Video image is not optimal
(i.e., fuzzy, blurry, smeared,
ghosted, or dull).

Technical Support

If, after carefully following the steps in the Troubleshooting section, you are
unable to resolve issues with the installation or operation of the V8, please call
ELAN Technical Support at 1-800-622-ELAN (3526).
© ELAN Home Systems 2009 • All rights reserved.
Possible Cause
1. In-house video wiring picking
up noise from high-voltage lines
or other source of interference.
2. In-house coax runs have sharp
bends or using poor quality
cable.
3. Video wiring bad/damaged.
V8
INSTALLATION MANUAL
Solution
Do not run video wiring near AC
lines. If necessary, cross AC lines
at 90 degrees.
Make gradual bends in coax when
running wire. Use high-quality
RG-6 coaxial cable.
Verify/correct video wiring.
Page 21