Table of Contents
Advertisement
E L A N H O M E S Y S T E M S
Front Panel Unit ID Designations
The Output/Input LED indicators on the front panel display the V8's chassis designation. A decimal point located next
to the digit in the display window indicates the Unit ID for each chassis. Chassis 1 by default would not display any
decimal points as shown in Figure 4-2. A dash in the Input window indicates the Output is OFF or "Video Mute".
DIP Switch Settings - BAUD RATE
Set the BAUD RATE DIP switch (#3) to the 9600 position (Up) when utilizing RS-232 controllers that require this baud
rate. Use the 19.2k (Down) position for ELAN RS-232 applications and third party controllers that operate at 19.2k.
© ELAN Home Systems 2009 • All rights reserved.
V8 #1
V8 #3
MUTE
Output
Figure 4-2: Front Panel Unit ID Designations
1 2 3 4
9600
Figure 4-3: Baud Rate Designations
V8 #2
V8 #4
Input
1 2 3 4
19.2k
V8
INSTALLATION MANUAL
Page 17
Advertisement
Table of Contents
