Table of Contents
Advertisement
V8
E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
IR PWR DIP Settings
When powering external IR Receivers such as the ELAN IRS5, enable (DOWN) the IR PWR DIP Switch (#4). When not
using an external IR Receiver, the DIP switch should remain in the factory default position (UP).
1 2 3 4
1 2 3 4
OFF
ON
Figure 4-4: IR PWR DIP Settings
Page 18
© ELAN Home Systems 2009 • All rights reserved.
Advertisement
Table of Contents
