Advertisement
LAMP INFORMATION:
• Only fit or replace the lamp when the device is unplugged from the mains.
• Let the lamp cool down for 5 - 10 minutes before replacing it as the temperature of the lamp can reach 700°C
during operation.
• When handling the lamp, do not touch it with your bare hands, use a cloth to insert or remove it.
• Do not install lamps with a higher wattage than what this unit is designed for.
• Replace a deformed or damaged lamp with a lamp of the same type.
• To replace the lamp:
1. Unscrew and remove the protective grille.
2. Carefully remove the old lamp and insert the new lamp into the socket.
3. Replace the protective grille and tighten the screws.
• Care should be taken when handling UV cannons and lamps due to the lamps being very fragile. UV cannons
containing lamps should always be transported in a foam lined, padded flightcase with the lamp facing downwards
in a vertical direction. Shocks, drops or sudden movements can lead to damage of the lamp or lamp base.
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed of
with other household wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for environmentally
safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for disposal.
www.prolight.co.uk
400W UV Cannon User Manual
WEEE notice
4
Advertisement
