SMA SUNNY ISLAND 3.0M Installation Manual page 22

6 Mounting
Dimensions for wall mounting:
Figure 8: Dimensions of the wall mounting bracket and dimensions of the drill holes for the optional anti-theft device on the Sunny Island inverter
enclosure
Sunny Island with order option "Communication via RS485" or "Communication in multicluster
systems"
Any ordered communication interfaces are installed in the master at the factory. The master can be identified by the
labeling on the packaging.
• For single-cluster systems and multicluster systems, mount the Sunny Island units with integrated communication
interfaces at the planned mounting locations for masters.
Additionally required mounting material (not included in the scope of delivery):
☐ At least two screws that are suitable for the support surface.
☐ At least two washers suitable for the screws.
☐ At least two screw anchors suitable for the support surface and the screws.
☐ If the inverter is to be secured against theft, two security screws that can only be unscrewed with a special tool.
22 SI30M-44M-60H-80H-IA-en-32
SMA Solar Technology AG
Installation manual