Table of Contents
Advertisement
Using the phone
18
Call timer
Your handset automatically displays
the duration of every external call.
The call time will remain on the
display until 2 seconds after the call
has ended.
Press Right soft key C to delete an
incorrect digit.
If you have subscribed to a Caller
Display service, your caller's number
will also be shown. If the number is
withheld the display will show
WITHHELD. If an exact number match is
found in the Directory, the name will
be displayed instead of the number.
See page 38 for more information.
Internal calls
When you receive an internal call, the
calling handset number will be shown
on the handset display.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
Switch the handset on/off
1. Press and hold
to switch the handset on and off.
Make a call
1. Press
.
Enter the telephone number and the number is dialled.
Preparatory dialling
Use preparatory dialling to see and check the number on
the display before you dial out. The display can only show 11
digits at a time, if you enter a number with more than 11
digits,
will be displayed to the left of the number to indicate
more digits.
1. Enter the number first then press
End a call
1. Press
or place the handset back on the base.
Receiving calls
When you receive an incoming call, the telephone will ring and
the
icon will flash. If the ringer is set to off, the phone will
not ring but you will hear one short beep tone to alert you.
1. If the handset is not in the base/charger, press
to answer the call.
or
to dial.
or
Advertisement
Table of Contents
