Toyotomi TGS-28FWCA Owner's Manual page 31

Maintenance Method
Fig. III
● Clean air inlet grille
1. Open air inlet grille (the same with the 1st step of Clean Air Filter)
2. Take out air filter (the same with the 2nd step of Clean Air Filter)
3. Take out air inlet grille
Open air inlet grille for an angle of 45°, as shown in fig. IV, rise it.
4. Clean
Clean it by pubescence brush, water and neutral cleaning, then throw water or dry it.
Note！
Do not use water above 45℃ to wash the panel to prevent fade or deformation.
5. Install air inlet grille (refer to 3rd step)
6. Install air filter (refer to the 4th step of Clean Air Filter)
7. Close air inlet grille (refer to the 1st step)
● Install and change of air purifier
1. Open air inlet grille (the same the 1st step of Clean Air Filter)
2. Disassembly purifier
As shown in fig V, disassembly air filter, screw out fixing bolts fixed
on purifier on filter, then purifier could be disassembly.
3. Take out the package sack of static fiber net filter, then install the
filter in stand of purifier, and fix purifier on air filter.
4. Install air filter (the same with the 4th step of Clean Air Filter)
Air filter
Purifier filter
Stand for purifier
Fix bolt of
purifier
27
Fig. IV
Fig. V