o The body near the nozzle should always be clean. Dirt
accumulating around the nozzle may clog it, as a result of which
the burner will not light or will light only with a small flame. To
clean the nozzle use a brush soaked in solvent.
o Dry all the elements of the burner carefully as wet elements may
not light properly. Assemble the clean and dry burners carrying
out the disassembly steps in reverse order.
Replacing the oven bulb
IMPORTANT: The oven must be disconnected from
your mains supply before you attempt to either
remove or replace the oven bulb.
o Replace the bulb with a 15 W/300°C, screw type pygmy.
o Do not use any other type of bulb.
o Screw the lamp cover back into its original position.
o Remove all oven shelves
and the drip tray.
o Unscrew the lamp cover.
o Unscrew
remove it from its holder.
22
the
bulb
and