Snmp; Firmware Upgrades; Password Recovery - Dataprobe iBootBar iBB-N15 Installation And Operations

SNMP

Up to four SNMP managers can be set. Each manager will receive Trap notifications for outlet changes, autoping and
current alarms. Set the SNMP manager IP addresses using the
Enable or Disable SNMP for any manager with the
distribution CD, or at http://Dataprobe.com/ibootbartools.html
The iBootBar also supports the following elements of MIB-II
mgmt [1.3.6.1.2]
|
-> [ 1] -BR- mib-2
|
-> [ 1] -BR- system
|
-> [ 1] *RO* DisplayString
-> [ 2] *RO* OBJECT IDENTIFIER
-> [ 3] *RO* TimeTicks
-> [ 4] *RW* DisplayString
-> [ 5] *RW* DisplayString
-> [ 6] *RW* DisplayString
-> [ 7] *RO* INTEGER

Firmware Upgrades

The iBootBar can be upgraded via the network if the upload feature has been enabled using the
command on the console interface. To upgrade the iBootBar download the latest version of the firmware and upgrade
utility from the Dataprobe website.

Password Recovery

Holding the reset button on the front panel of the iBootBar for 5 seconds or longer will initiate a password recovery
mode. Once the reset button is released, the user has 30 seconds to log in to the CLI using the username
password admin . Upon accessing the CLI, change the username and password for User 1 as desired.
iBootBar V1.5x
set snmp <n> enable <yes/no>
http://Dataprobe.com/ibootbartools.html
set snmp <n> ipaddress <dotted decimal>
command. The MIB is available on the
sysDescr
sysObjectID
sysUpTime
sysContact Truncated to 128 Char
sysName Truncated to 128 Char
sysLocation Truncated to 128 Char
sysServices
command.
set upload enable yes
and
admin
Page 31