Group Commands - Dataprobe iBootBar iBB-N15 Installation And Operations

Group Commands

Command
get groups
get group <groupname>
set group <groupname> <on/off/cycle>
add group <groupname>
set group <groupname> device <#1‐#16/devname/all>
outlet <1‐8/all> <yes/no>
ren group <groupname> <newname>
del group <groupname>
Network Commands
Command
get network
set ipmode <arp‐ping/static/dhcp>
set ipaddress <dotted decimal>
set subnet <dotted decimal>
set gateway <dotted decimal>
Page 20
Description
Returns a list of the groups that the current user has rights to.
Returns the details of the selected group
Controls the selected group
Adds a new group. 20 characters max. Up to 8 groups maximum
Adds or deletes a specific outlet on a specific device from the
selected group.
Renames the selected group. 20 characters max.
Deletes the selected group.
Description
Returns the network settings
Set the IP Mode of the root iBootBar
Set the root iBootBar's IP Address in dotted decimal
Set the root iBootBar's subnet mask in dotted decimal
Set the root iBootBar's gateway in dotted decimal
Admin Fact Def
No
No
No
Yes
Yes
Yes
Yes
Admin Fact Def
Yes
Yes ARP-Ping
Yes 192.168.0.254
Yes 255.255.255.0
Yes 0.0.0.0
iBootBar V1.5x