Autoping Commands; Event Commands - Dataprobe iBootBar iBB-N15 Installation And Operations

Command
set syslog server

Autoping Commands

Command
get autoping <1‐16>
set autoping <1‐16> ipaddress <dotted decimal>
set autoping <1‐16> action <action>
set autoping <1‐16> frequency <1‐999>
set autoping <1‐16> count <1‐99>
set autoping <1‐16> device <name/#1‐16>
outlet <1‐8>
set autoping <1‐16> group <name>

Event Commands

Command
get events
get event <eventname>
add event <eventname>
Page 22
Description
Set the IP address of the syslog server.
Description
Returns the settings and state of the selected autoping.
Set the IP address of the selected auto ping in dotted decimal.
Set the action of the selected auto ping. On-Follow, On-Latch, Off-
Follow, Off-Latch, Cycle, Cycle-Once, or None.
Set the frequency of the selected autoping in seconds
Set the number of failures the select autoping requires before it
triggers its action.
Assign an AutoPing to either a device/outlet or group.
AutoPing can be assigned to one or the other
Description
Returns a list of all pending events
Returns the details of the selected event
Creates a new event. Up to 16 events can be created.
The default time and date will be the time and date that the event is
Admin Fact Def
Yes
Admin Fact Def
Yes
Yes 0.0.0.0
Yes None
Yes 10
Yes 3
Each Yes
Yes
Admin Fact Def
Yes
Yes
Yes
iBootBar V1.5x