User Commands - Dataprobe iBootBar iBB-N15 Installation And Operations

User Commands

Command
get users
get user <username>
add user <username>
del user <username>
ren user <username> <newname>
set user <username> device <#1‐#16/devname/all> outlet
<1‐8/all> <yes/no>
set user <username> group <name> <yes/no>
set user <username> role <admin/user>
set user <username> password <password> <confirm>
set user <username> email <address>
set user <username> sendmail <yes/no>
set set user <username> pin <pin>
iBootBar V1.5x
Description
Return a list of all current users
Returns the selected user's details
Added a user to the root iBootBar's user table. 16 users maximum.
20 Characters max.
Note: the new user's password will default to the same as the
username.
Users default to no rights to any outlets. Add user rights to outlets
and groups.
Deletes the selected user from the root iBootBar's user table
Renames the selected user in the root iBootBar's user table. 20
character max.
Sets the users right to the selected outlet on a specific device.
Sets the user's rights to the selected group
Sets the user's roll.
Sets the user's password. 20 characters max.
Sets the user's email address for the root iBootBar to send alerts
to. 64 characters max.
Enables or disables the user's receipt of email alerts.
Sets the user PIN for DTMF control. –M models only. 4 – 10 digits.
Admin Fact Def
Yes
Yes
Yes
Yes
Yes
Yes No Rights
Yes No Rights
Yes User
Yes User's Name
yes
Yes No
Yes
Page 17