Configuration; Setup And Control Utility - Dataprobe iBootBar iBB-N15 Installation And Operations

Setup & Control Utility
The iBootBar Setup and Control Utility (SCU) utility provides the easiest means to find and configure your iBootBar for
use. The SCU can:
1. Automatically discover multiple iBootBars on a local network
2. Add additional iBootBars, not on the local network
3. Download existing configurations from installed iBootBars
4. Save existing configurations for later use or as backup
5. Open saved configurations for change management
6. Clone saved configurations for replication of similar configurations in multiple iBootBars
7. Upload modified configurations to iBootBars
8. Control Power Outlets on one or more iBootBars throughout the network
The iBootBar Setup and Control utility is available on the iBootBar CD or download it from
http://dataprobe.com/ibootbartools.html
The Setup and Control Utility only operates with iBootBars attached to the network.
iBootBars in a cluster configuration can be configured using the setup and control utility, if
they are attached to the network.
Page 10

Configuration

iBootBar Setup and Control Utility
iBootBar V1.5x