Email Notification - Dataprobe iBootBar iBB-N15 Installation And Operations

Email Notification

Email can be automatically sent for outlet changes, AutoPing triggers and current alarms. The necessary parameters
for email are set using the Telnet / Serial Interface:
set email server <dotted decimal>
set email address <return address 64 char max>
set email username <user name 128 char max>
set email password <password 128 char max>
Each user is assigned an email address and email can be turned on or off for that user:
set user <name> email <email address 64 char max>
set user <name> sendmail <yes/no>
Emails generated by iBootBar will display the device, outlet(s) command along with the user and method of control.
Examples:
Subject : Power Switch: Cabinet_1
Date : Mon, 7 Jul 2008 09:41:00 -
0500
: <iBootBar@dataprobe.com>
From
: <networkadmin@yourco.com>
To
Location: Cabinet_1
Outlets: 5 Server_B
Command: Cycle
User: admin
Source: Telnet
Subject : Power Switch: Cabinet_3
: Mon, 7 Jul 2008 09:46:00 -
Date
0500
From : <iBootBar@dataprobe.com>
To : <networkadmin@yourco.com>
Location: Cabinet_1
Outlets:
3 Router_A
6 Router_B
Command: Off
User: admin
Source: Web
Page
30
iBootBar V1.5x