Ethernet
Overview
The unit can control the monitor using the commands
described in this manual via the network (Ethernet). For
example, the Input Select, etc. can control from the
external controller such as the PC.
On notation
This document uses the following notations:
• A hexadecimal number is indicated by an h after the
number (10h = 0x10 = 16.) Otherwise, the number is
a decimal.
• Character strings are enclosed by quotation marks
(" ").
22
Overview / Connections
Connections
When you connect the unit to the network that uses the
Ethernet, use the straight cable. When using a hub for
network connection, use a hub with automatic cable type
(straight or cross) detection feature (AUTO MDIX).
Network ports used by the monitor (the FTP
data port is not shown)
Service
Port
Factory
number
setting
SDAP
53862
Auto start
SDCP
53484
Auto start
FTP
21
Auto start
Change
Service
Port
usage
number
No
No
No
No
No
No