Stamina DT PRO 35-1485 Owner's Manual page 8

ASSEMBLY INSTRUCTIONS
STEP 3
Insert the EXTENSION FRAME(22) into the RAIL(92) and secure with BUTTON HEAD BOLTS(M8x1.25x20mm)
(83) and WASHERS(M8)(6). Slide the SEAT(9) onto the RAIL(92).
STEP 4
Slide the REAR STAND(18) into the RAIL(92) and secure with BUTTON HEAD BOLTS(M8 x1.25x20mm)
(83) and WASHERS(M8)(6).
STEP 5
Refer to the detail view. Hook the ROUND HEAD SCREW(M4x12mm)(20) which is attached on the REAR
COVER(19) into the key hole on the REAR STAND(18). Secure the REAR COVER(19) to the REAR
STAND(18) with BUTTON HEAD BOLT(M8 x1.25x15mm)(21).
83
22
6
92
9
19
20
18
92
83
6
19
21
18
8