Stamina DT PRO 35-1485 Owner's Manual page 19

COMPUTER INSTRUCTIONS
C. USER SETTING PROGRAMS (PROGRAM 9 to 12)
STEP 1: POWER ON
Handlebar Pulling or press any button.
STEP 2 : SELECT PROGRAM
Press " / " buttons until the desired program is displayed.
STEP 3: SET THE PROGRAM TIME or DISTANCE, COUNT, and CALORIES
Press the ENTER button to select the program. The computer will go through the input items as follows
and allow you to set the function values. Use "
the ENTER button to pass some of the inputs.
Time (5:00 to 99:00)
(Note: You can only preset the "TIME" or "DISTANCE" for the program.)
STEP 4 : EDIT THE PROGRAM PROFILE
Press the ENTER button, interval 1 will begin flashing. Use "
Press the ENTER button to proceed to the next interval. Use "
STEP 5 : START TO WORKOUT
Press the START / STOP button to start to workout.
OPERATION DESCRIPTIONS
1. You may preset values for several functions. The preset function values will start to count down once
you press the START / STOP button to start exercising. Preset values will only count down, they will not
count up. When you complete one of the preset functions, the computer will remind you with an audible
alarm for ten seconds and stops running the program. Press any button to stop the audible alarm. Two
possible options follow: Option A: press the START / STOP button to continue to run the current program.
The value of this completed function will start to count up, while the other preset functions will continue
to count down until you reach the next preset function. Option B: press "
program.
2. To stop a running program, press the START / STOP button. In this mode, you can press the START /
STOP button again to continue to run the current program. Or, you can use "
a new program.
3. If you want to restart with a new program, press the RESET button or press and hold the START / STOP
button down for two seconds to reset all of the function values to zero. Use "
a new program.
4. The computer will shut off automatically after 4 minutes of inactivity and all function values will be reset
to zero.
Count (0 to 9990 rows)
/ " and ENTER buttons to input the values. Or press
Distance (0 to 999 mile)
/ " buttons to set the load for interval 1.
/ " buttons to set the load for each interval.
19
Calories (0 to 990 Kcal)
/ " buttons to select a new
/ " buttons to select
/ " buttons to select