Hitachi SK-HD2200 Operating Instructions Manual page 53

Function menu
7.3 DETAIL MENU (MAIN-MENU) which are displayed in the Pix monitor or are displayed in the
viewfinder with at control head mode.
7.3.1 DETAIL 1 menu (DETAIL SUB-MENU) & description.
7.3.2 DETAIL 2 menu (DETAIL SUB-MENU) & description.
Item
DETAIL Change screen to DETAIL menu.
SKIN DTL Change screen to SKIN DTL menu.
HIGH CHROMA Change screen to HIGH CHROMA menu.
Item Setting
LEVEL -128 to +127
H GAIN -128 to +127
V GAIN -128 to +127
H CRISP -128 to +127
V CRISP -128 to +127
LEVEL DEP -128 to +127
DTL FREQ 13, 14, 15, 16,
17, 18, 19
DETAIL ON,OFF
INITIALIZE
－
Item Setting
D.KNEE WHT -128 to +127
D.KNEE BLK -128 to +127
DETAIL KNEE ON, OFF
P/N BALANCE 4/8, 5/8, 6/8, 7/8,
8/8, 8/7, 8/6, 8/5,
8/4
KNEE DETAIL -128 to +127
DTL SOURCE G,R+G,R+G+B
DETAIL OFF, ON
INITIALIZE
－
41
Description
Initial Description
setting
0 Adjust Detail level
-60 Adjust H. detail gain
-60 Adjust V. detail gain
-115 Adjust H detail crisp
-115 Adjust V detail crisp
-35 Adjust level dependent of detail
17 MHz Set boost frequency of detail
ON Detail On and OFF
Press RIGHT and LEFT buttons to
－ － － － initialize DETAIL 1 menu items.
Initial Description
setting
110 Positive detail knee adjust
120 Negative detail knee adjust
ON DETAIL KNEE ON and OFF
8/8 Balance adjustment for
POS/NEG detail
0 Adjust knee detail slope
R+G Set source signal for detail
ON Set On and OFF detail
Press RIGHT and LEFT
buttons to initialize DTL 2
－ － － －
menu items.