Asus TW510-E2 Service Manual page 132

5. Press <TAB> to move to the F r e e D i s k s
6. Highlight the hard disk drives that you want to add in the RAID set,
then press the right arrow key to select. The selected hard disk drives
appear in the A r r a y D i s k s
desired hard disk drives are added.
RAID Mode:
Free Disks
Loc
1.0.M
1.1.M XXXXXXXXXXXXXXXXXX
2.0.M
2.1.M
[F6] Back
7. After selecting the hard disk drives, press
<F7> to create the RAID 0 set. A pop-up
window appears.
8. Press <Y> to delete all data from the hard disk drives, or <N> to
continue creating the RAID set without deleting the data on the disks.
You will lose all data on the drives if you clear the disk data!
9. The utility displays the created RAID 0 set. Press <Ctrl+X> to save
your settings and exit the utility.
[Ctrl-X]Exit
6 - 6 6 - 6
6 - 6 6 - 6 6 - 6
A r r a y D i s k s A r r a y D i s k s section. Repeat the process until all A r r a y D i s k s
A r r a y D i s k s
NVIDIA RAID Utility
- Define a New Array -
Striping
Disk Model Name
XXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXX
[F7] Finish [TAB] Navigate
NVIDIA RAID Utility
- Array List -
Boot Id Status
No 4 Healthy
↑↓ ↑↓ ↑↓]Select ↑↓
[↑↓ [B]Set Boot
F r e e D i s k s section. F r e e D i s k s F r e e D i s k s
F r e e D i s k s
Oct 5 2004
Striping Block:
Array Disks
Loc Disk Model Name
1.0.M XXXXXXXXXXXXXXXXXX
[→] Add
[←] Del
[↑↓] Select
Oct 5 2004
Vendor Array Model Name
NVIDIA STRIPING XXX.XXG
[N]New Array
C h a p t e r 6 : D r i v e r i n s t a l l a t i o n C h a p t e r 6 : D r i v e r i n s t a l l a t i o n
C h a p t e r 6 : D r i v e r i n s t a l l a t i o n C h a p t e r 6 : D r i v e r i n s t a l l a t i o n C h a p t e r 6 : D r i v e r i n s t a l l a t i o n
Optimal
[ENTER] Popup
Clear disk data?
[Y] YES [N] Cancel
[ENTER]Detail