Asus TW510-E2 Service Manual page 114

5.5.1 5.5.1 5.5.1 APM Configuration APM Configuration APM Configuration
5.5.1 5.5.1 APM Configuration APM Configuration
This menu shows the Advanced Powed Management (APM) configuration
settings. Select an item then press <Enter> to display a pop-up menu with
the configuration options.
Main Advanced
Power Management
HDD Power Down
Video Off Method
Soft-Off by PBTN
Restore on AC Power Loss
Power On By PCI Devices
WOR(RI#) From Soft-Off
USB Wake-Up From S1/S3
Power-On By Alarm
Day of Month Alarm
Time (hh:mm:ss)
Power On Function
Power On By PS/2 Mouse
F1:Help
ESC: Exit
Power Management [User Define] Power Management [User Define] Power Management [User Define] Power Management [User Define] Power Management [User Define]
Allows you to set the automatic power saving features.
Configuration options: [User Define] [Min Saving] [Max Saving]
HDD Power Down [Disabled] HDD Power Down [Disabled]
HDD Power Down [Disabled] HDD Power Down [Disabled] HDD Power Down [Disabled]
Shuts down any hard disk drives in the system after a period of inactivity
as set in this field.
Configuration options: [Disabled] [1 Min] [2 Min]... [15 Min]
Video Off Method [DPMS Support] Video Off Method [DPMS Support] Video Off Method [DPMS Support]
Video Off Method [DPMS Support] Video Off Method [DPMS Support]
Allows you to select the video off method. The Display Power Management
System (DPMS) feature allows the BIOS to control the video display card if
it supports DPMS. [Blank Screen] only blanks the screen. Use this for
monitors without power management or "green" features.
Configuration options: [Blank Screen] [V/H Sync+Blank] [DPMS Support]
Soft-Off By PBTN [Instant-Off] Soft-Off By PBTN [Instant-Off] Soft-Off By PBTN [Instant-Off]
Soft-Off By PBTN [Instant-Off] Soft-Off By PBTN [Instant-Off]
When set to [Instant-Off], the system goes to soft-off when you press the
power button for less than 4 seconds. When set to [Delay 4 Sec], the
system power goes off when you press the power button for more than 4
seconds. Configuration options: [Delay 4 Sec] [Instant-Off]
5 - 3 4 5 - 3 4
5 - 3 4 5 - 3 4 5 - 3 4
Phoenix-Award BIOS CMOS Setup Utility
Power Boot Exit
APM Configuration
[PDMS Support]
[Power Off]
↑↓ ↑↓ ↑↓ ↑↓ ↑↓ : Select Item
→← →←: Select Menu →← →← →←
Enter: Select Sub-menu
[User Define]
[Disabled]
[Instant-Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
0
0 : 0 : 0
[Disabled]
[Disabled]
-/+: Change Value
C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p
Select Menu
Item Specific Help
This field allows you to
set the automatic power
saving features.
F5: Setup Defaults
F10: Save and Exit