Sartorius secura Installation And Operating Instructions Manual page 81

Technical Specifications
Model-specific Data
Quintix
Model 612-1x
Weighing capacity g 610
Readability mg 10
Repeatability mg 10
(standard deviation)
Linearity mg 30
Sensitivity drift ± ppm/K 4
between
+10 to +30°C
Typical stabilization s 1.5
time
isoCAL Settings:
– temperature change K 2
– time interval h 6
Display result s 0.1/0.2
(depending
on the filter level)
Weighing pan size mm d 180
Net weight, approx. kg 4.7
Practum
Model 224-
1x
Weighing capacity g 220
Readability mg 0.1
Repeatability mg 0.1
(standard deviation)
Linearity mg 0.2
Sensitivity drift ± ppm/K 2
between
+10 to +30°C
Typical stabilization s 2
time
d 90
Weighing mm
pan size
Weighing chamber mm 209
height*
Net weight, approx. kg 4.5
FCC Rules
Safety Precautions:
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
®
1 1
) 412-1x ) 6101-1x
410 6,100
10 100
10 100
30 300
4 8
1.5 1.5
2 2
6 6
0.1/0.2 0.1/0.2
d 180 d 180
4.7 4.7
®
124- 64- 513- 313-
1 1 1 1 1
) 1x ) 1x ) 1x ) 1x )
120 60 510 310
0.1 0.1 1 1
0.1 0.1 1 1
0.2 0.2 2 2
2 2 3 3
2 2 1 1
d 90 d 90 d 120 d 120 d 120 d 180 d 180 d 180 d 180 d 180 d 180 d 180 d 180 d 180 d 180
209 209 209 209
4.5 4.5 4.9 4.9
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver
– Consult the dealer or an experienced radio/TV
technician for help.
Shielded Cables: Connections between the
devices and peripherals must be made using
shielded cables in order to maintain compliance
with FCC radio frequency emission limits.
1 1 1
) 5101-1x ) 2101-1x )
5,100 2,100
100 100
100 100
300 300
8 8
1.5 1.5
2 2
6 6
0.1/0.2 0.1/0.2
d 180 d 180
4.7 4.7
213- 3102- 2102- 1102- 612-
1 1 1 1
1x ) 1x ) 1x ) 1x ) 1x
210 3,100 2,100 1,100 610
1 10 10 10 10
1 10 10 10 10
2 20 30 30 30
3 4 4 4 4
1 1.5 1.5 1.5 1.5
209 – – – –
4.9 3.1 3.1 3.1 3.1
Installation and Operating Instructions Secura, Quintix, Practum
1 1
6100-1x ) 5100-1x )
6,100 5,100
1,000 1,000
500 500
1000 1000
8 8
1 1
2 2
6 6
0.1/0.2 0.1/0.2
d 180 d 180
4.7 4.7
412- 6101- 5101- 2101-
1 1 1 1 1
) 1x ) 1x ) 1x ) 1x )
410 6,100 5,100 2,100 6,100 5,100
10 100 100 100
10 100 100 100
30 300 300 300
4 8 8 8
1.5 1.5 1.5 1.5
– – – –
3.1 3.1 3.1 3.1
Modifications: Any modifications made to
this devices that are not approved by Sartorius
Lab Instruments GmbH & Co. KG may void the
authority granted to the user by the FCC to
operate this equipment.
1
) Possible terms for country-specific models:
x = S: Standard balances without country specific
additions
x = SAR: Standard balances with country specific
additions for Argentina only
x = SJP: Standard balances with country specific
additions for Japan only
x = SKR: Standard balances with country specific
additions for South Korea only
* Upper edge of the weighing pan to the lower
edge of the upper draft shield panel
6100- 5100-
1 1
1x ) 1x )
1,000 1,000
500 500
1,000 1,000
8 8
1 1
– –
3.1 3.1
81