Securing Stove Pipe/Liner To Flue Collar; Leveling Legs - Quadra-Fire 27I-ACC Installation Manual

B. Securing Stove Pipe/Liner to Flue Collar
1. There are 4 pre-drilled holes in the fl ue collar 90 degrees
apart. Attach the fl ue collar to the stove pipe/liner. If the
seal is questionable use high temperature sealant such
as stove mastic Figure 19.1.
2. Attach gasket to bottom side of fl ue collar with a thin coat
of silicone.
Flue Collar
Figure 19.1
May 14, 2015
Gasket
Stove Pipe/Liner
C. Leveling Legs
1. Remove the 2 screws already installed on each leg.
2. Move legs to the desired height.
3. Re-install the screws to secure in place.
Remove 2 screws from both sides.
Adjust the legs up or down to level
appliance.
Figure 19.2
7046-192C
2700 I-ACC
19