Quadra-Fire 21M-ACC-C Owner's Manual

Quadra-Fire 21M-ACC-C Owner's Manual

2100 millennium wood appliance automatic combustion control

Advertisement

Quick Links

INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.
Contact your dealer with question on installation, operation, or service.
NOTICE: DO NOT DISCARD THIS MANUAL
2100 MILLENNIUM WOOD
APPLIANCE
AUTOMATIC COMBUSTION
CONTROL (ACC)
MODEL NUMBER:
21M-ACC-C
Installation and service of this appliance should be performed by
qualified personnel. Hearth & Home Technologies recommends
HHT Factory Trained or NFI certified professionals.
1
Owner's Manual
Operation & Care
R
7039-802G
If the information in these instructions is
not followed exactly, a fire could result
causing
property
injury, or death.
• Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
• Do not over-fire - If appliance or chimney connector
glows, you are over-firing. Over-firing will void
your warranty.
• Comply with all minimum clearances to combustibles
as specified.
Failure to comply may cause house fire.
HOT SURFACES!
Glass and other surfaces are hot
during operation AND cool down.
Hot glass and appliance will cause burns.
• Do not touch glass until it is cooled
• Use leather gloves when reloading fuel
• NEVER allow children to touch glass
• Keep children away
• CAREFULLY SUPERVISE children in same room
as appliance.
• Alert
children
and
high temperatures
• High temperatures may ignite clothing or other
flammable materials.
• Keep
clothing,
furniture,
flammable materials away.
Fire Risk.
For use with solid wood fuel only.
Other fuels may over-fire and generate
poisonous gases (i.e. carbon monoxide).
NOTE: To obtain a French translation of this manual,
please contact your dealer or visit
REMARQUE : Pour obtenir une traduction française de
ce manuel, s'il vous plaît contacter votre revendeur ou
visitez
www.quadrafire.com
WARNING
damage,
personal
WARNING
adults
to
hazards
draperies
and
WARNING
www.quadrafire.com
of
other
02/23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 21M-ACC-C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Quadra-Fire 21M-ACC-C

  • Page 1 • Comply with all minimum clearances to combustibles as specified. MODEL NUMBER: Failure to comply may cause house fire. 21M-ACC-C WARNING HOT SURFACES! Glass and other surfaces are hot during operation AND cool down. Hot glass and appliance will cause burns.
  • Page 2: Sample Of Serial Number / Safety Label

    Welcome to the Quadra-Fire Family NOTE: Clearances may only be reduced by means approved by the regulatory authority having jurisdiction A. Sample of Serial Number / Safety Label LOCATION: Back of appliance CAUTION HOT WHILE IN OPERATION DO NOT TOUCH, KEEP CHILDREN AND CLOTHING AWAY. CONTACT MAY CAUSE SKIN BURNS. KEEP FURNISHINGS AND OTHER COMBUSTIBLE MATERIAL FAR AWAY FROM THE APPLIANCE.
  • Page 3: Table Of Contents

     = Contains updated information J. Frequently Asked Questions....15 Quadra-Fire is a registered trademark of Hearth & Home Technologies. 7039-802G 02/23...
  • Page 4: Warranty Policy

    B. Warranty Policy Hearth & Home Technologies LIMITED LIFETIME WARRANTY Hearth & Home Technologies, on behalf of its hearth brands (“HHT”), extends the following warranty for HHT gas, wood, pellet and electric hearth appliances that are purchased from an HHT authorized dealer. WARRANTY COVERAGE: WARRANTY PERIOD: distributor, whichever occurs earlier.
  • Page 5 WARRANTY CONDITIONS: • This warranty only covers HHT appliances that are purchased through an HHT authorized dealer or distributor. A list of HHT authorized dealers is available on the HHT branded websites. • • This warranty is only valid in the country in which the HHT authorized dealer or distributor that sold the appliance resides. •...
  • Page 6: Quick Start Guide

    C. Quick Start Guide NOTE: These are generic drawings and may not represent your specifi c model. 10 Pieces of Newspaper, 10-20 Pieces of Dry ITEMS NEEDED FOR FIRST FIRE: Kindling and Few Pieces of Dry Split Wood. OPEN AIR CONTROLS LOAD WOOD ADD NEWSPAPER...
  • Page 7: Listing And Code Approvals

    High EPA Test and BTU content of seasoned cordwood (8600) times the efficiency. The 21M-ACC-C is Certified to comply with 2020 crib wood particulate emission standards. This wood appliance needs periodic inspection and repair for proper operation. It is against federal regulations to operate this wood appliance in a manner inconsistent with operating instructions in this manual.
  • Page 8: Glass Specifications

    D. Glass Specifications WARNING This appliance is equipped with 5mm ceramic glass. Replace glass only with 5mm ceramic glass. Please contact your dealer for replacement glass. Fire Risk. Hearth & Home Technologies disclaims any E. Mobile Home Approved responsibility for, and the warranty will be voided by, the following actions: •...
  • Page 9: Operating Instructions

    • Permit too much air to the fire In order to improve the situation, we at Quadra-Fire have developed cleaner-burning wood appliances that surpass the requirements for emissions established by our Visit www.quadrafire.com/shopping-tools/videos...
  • Page 10: Burn Rates And Operating Efficiency

    It is very important to reload your appliance while 2. Medium low burn setting: enough lively hot coals remain in order to provide the - Burn Rate Air Control spring handle up to high position amount of heat needed to dry and rekindle the next load for 5 minutes.
  • Page 11 WARNING CAUTION Risk of Fire. When set on High Burn Rate and over-riding Injury Risk. the Automatic Combustion Control system an • Gloves recommended over fire situation can occur and may result in a chimney fire. Over firing will void the appliance warranty. Manual Timer Over-Ride: If you need to shut the ACC system off before it goes through the cycle of shutting itself off;...
  • Page 12: Building A Fire

    E. Building A Fire NOTE: Before lighting your first fire in the appliance: • Build fire on brick firebox floor. • Do NOT use grates, andirons or other methods to NOTE: The special high temperature paint that your support fuel. It will adversely affect emissions. appliance is finished with will cure as your appliance heats.
  • Page 13: Blower Operating Instructions

    G. Opacity (Smoke) This is the measure of how cleanly your appliance is burning. NOTE: If your Quadra-Fire wood appliance is equipped Opacity is measured in percent; 100% opacity is when an with an optional blower, you should follow these...
  • Page 14: Clear Space

    H. Clear Space I. Negative Pressure NOTE: Do NOT place combustible objects within WARNING 4 ft (1.2m) of the front of appliance (Figure 14.1). Asphyxiation Risk. • Mantel: Avoid placing candles and other heat-sensitive • Negative pressure can cause spillage objects on mantel or hearth.
  • Page 15: Frequently Asked Questions

    J. Frequently Asked Questions ISSUES SOLUTIONS When first operated, this appliance may release an odor for the first several hours. This is Odor from appliance caused by the curing of the paint and the burning off of any oils remaining from manufacturing. Noise is caused by metal expanding and contracting as it heats up and cools down, similar to Metallic noise the sound produced by a furnace or heating duct.
  • Page 16: Maintenance And Service

    Maintenance and Service CAUTION A. Quick Reference Maintenance Guide When properly maintained, your fireplace will give you many years of trouble-free service. Contact your Allow the appliance to completely cool down before dealer to answer questions regarding proper operation, performing any cleaning or maintenance. Start the troubleshooting and service for your appliance.
  • Page 17: General Maintenance

    B. General Maintenance 2. Disposal of Ashes • Frequency: When ash is within 1-3/4 in. (44mm) of 1. Creosote (Chimney) Cleaning firebox lip Frequency: Every 2 months during heating season or • • By: Homeowner as recommended by a certified chimney sweep; more frequently if chimney exceeds or is under 14-16 ft.
  • Page 18 4. Glass Cleaning 6. Inspect Firebrick • Frequency: As desired • Frequency: After each ash removal • By: Homeowner • By: Homeowner Replace the firebrick if they become crumbly and/or if there CAUTION is a 1/4 inch (6.35mm) gap between the bricks. Handle glass assembly with care.
  • Page 19: Correct Baffle & Blanket Placement

    INCORRECT POSITIONS C. Correct Baffle & Blanket Placement WARNING Fire Risk. Firebox damage due to improper baffle placement is not covered by warranty. Operate the wood burning appliance with the baffle in the correct position only. Not doing so could result in: •...
  • Page 20: Troubleshooting Guide

    Troubleshooting Guide With proper installation, operation, and maintenance your wood appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist you or a qualified service person in the diagnosis of a problem and the corrective action to be taken. START FIRE PROBLEMS POSSIBLE CAUSE SOLUTION...
  • Page 21: Service Part Replacement

    NOTE: DO NOT OVER TIGHTEN RETAINERS - can cause glass to break. 9. Replace the door on the appliance. Quadra-Fire appliances are equipped with ceramic super heat-resistant glass, which can only be broken by impact or misuse. WARNING Injury Risk.
  • Page 22: Snap Disc

    C. Snap Disc D. Door Handle Assembly NOTE: DO NOT over tighten locking nut; door handle Service Part: SRV230-0470 needs to move smoothly! 1. Locate the snap disc bracket assembly at the bottom left Service Part: SRV7039-008 rear corner of the appliance. 2.
  • Page 23: Baffle

    E. Baffle Fiber Blanket Service Part: 832-3390 Baffle Board Service Part: SRV27039-111 1. Remove all ash from the firebox, and extinguish all hot embers before disposal into a metal container. 2. The baffle board has 2 pieces. With the ceramic blanket still in place, slide one baffle piece over the top of other one and pull out top piece through the door opening and then remove bottom baffle piece (Figure 23.1).
  • Page 24: Tube Channel Assembly

    F. Tube Channel Assembly Service Part: SR7039-004 Removing Tube Channel Assembly 1. Remove the right side panel by removing 2 screws in the back using a Phillips head screw driver. 2. Remove 4 screws from channel access cover and remove cover. 3.
  • Page 25: Reference Materials

    Reference Materials A. Service and Maintenance Log Date of Service Performed By Description of Service 7039-802G 02/23...
  • Page 26 Date of Service Performed By Description of Service 7039-802G 02/23...
  • Page 27: Service Parts

    B. Service Parts List 21M-ACC-C Service Parts 2100 Millennium Wood Stove Beginning Manufacturing Date: Feb 2020 Advanced Combustion Control (ACC) Ending Manufacturing Date: Active Part number list on following pages. 01/23 7039-802G 02/23...
  • Page 28 21M-ACC-C Service Parts Beginning Manufacturing Date: Feb 2020 Ending Manufacturing Date: Active IMPORTANT: THIS IS DATED INFORMATION. When requesting service or replacement Stocked parts for your appliance please provide model number and serial number. All parts listed in this manual may be ordered from an authorized dealer.
  • Page 29 21M-ACC-C Service Parts Beginning Manufacturing Date: Feb 2020 Ending Manufacturing Date: Active IMPORTANT: THIS IS DATED INFORMATION. When requesting service or replacement Stocked parts for your appliance please provide model number and serial number. All parts listed in this manual may be ordered from an authorized dealer.
  • Page 30 21M-ACC-C Service Parts Beginning Manufacturing Date: Feb 2020 Ending Manufacturing Date: Active IMPORTANT: THIS IS DATED INFORMATION. When requesting service or replacement Stocked parts for your appliance please provide model number and serial number. All parts listed in this manual may be ordered from an authorized dealer.
  • Page 31 ITEM DESCRIPTION COMMENTS PART NUMBER Component Pack (Includes Gold Spring Handles (1) 1/2” For Black Doors SRV436-5350 & (2) 1/4”, (2) Gold Hinge Pins, Quadra-Fire Logo Paint Touch-Up 812-0910 Label, Burn Rate Air Control SRV7033-160 Label, Start-Up Air Control SRV7033-166...
  • Page 32 Hearth & Home Technologies 352 Mountain House Road Halifax, PA 17032 Division of HNI INDUSTRIES Please contact your Quadra-Fire dealer with any questions or concerns. For the number of your nearest Quadra-Fire dealer log onto www.quadrafi re.com CAUTION DO NOT DISCARD THIS MANUAL •...

Table of Contents