Turning On The Ms-7206 Power; Figure 29 Connecting The Power Wires To The Mp-7203 Power Module; Figure 30 Dressing The Mp-7203 Power Wires - ZyXEL Communications ms-7206 User Manual

Chapter 8 Connections and LEDs

Figure 29 Connecting the Power Wires to the MP-7203 Power Module

9 Make sure the power switch socket cover is flipped down and slide the power module
into the slot until it makes contact with the backplane.
10 Dress the power wires.
11 Tighten the thumbscrew.

Figure 30 Dressing the MP-7203 Power Wires

8.4.2 Turning on the MS-7206 Power

1 Turn on the power source (if it is not already turned on) or turn on the power supply
which is connected to the DC-DC power module.
2 Move the corresponding power switch on the power module to the ON position.
66
MS-7206 Hardware Installation Guide