Figure 26 Connecting The Power To The Mp-7201 Power Module; Figure 27 Dressing The Mp-7201 Power Cord - ZyXEL Communications ms-7206 User Manual

Chapter 8 Connections and LEDs
The MS-7206 supports two types of the power module: AC-DC converter (MP-7201) and DC-
DC converter (MP-7203). You can install one type depending on your power source or install
both types simutaneously.
The power connections are on the front of each power module. The power modules are in the
upper left of the front panel of the chassis.
8.4.1.1 Connecting the Power
Follow the steps below to connect power to the MS-7206.
MP-7201 AC-DC Power Module
1 Slide the power module's socket cover up and connect the female end of the power cord
to the power socket.
2 Flip the power cord retainer down.

Figure 26 Connecting the Power to the MP-7201 Power Module

3 Connect the other end of the cord to a power outlet.
4 Dress the power cords after you connect them.

Figure 27 Dressing the MP-7201 Power Cord

64
MS-7206 Hardware Installation Guide