ZyXEL Communications ms-7206 User Manual page 39

Table 14 MI-7248PWR Device Specifications (continued)
Humidity
Power Consumption
System LEDs
iStacking
Certifications
Other Features
MS-7206 Hardware Installation Guide
10% ~ 90% RH (non-condensing)
24 V, 5 A, 110 Watt maximum. This is the power that the module itself uses
from the chassis. It does not include the PoE power that the module
supplies to the PoE clients from the MP-7202.
ACT, SYS, PWR, ALM, PoE
Up to 24 switches on a single IP address.
CE Conformity
FCC
CSA International
Safety
IEC 60950-1
EN 60950-1
CSA 60950-1
ANS\UL 60950-1
EMC
FCC Part 15 (Class A)
CE EMC (Class A)
• iStacking
• IEEE 802.p with 8 CoS per port
• IEEE 802.1x port authentication by RADIUS
• IEEE 802.1D Spanning Tree Protocol
• IEEE 802.1W Rapid Spanning Tree Protocol
• IEEE 802.1Q Ethernet II
• PPPoE
• IEEE 802.3
• IGMP v1/v2
• DVMRP
• RIP v1/v2
• OSPF v2
• VRRP
• Static Routing Protocol
• IEEE 802.ad
• Static and dynamic (LACP) port aggregation
• GARP Timer
• Port Trunking
• MAC Address Learning
• Policy Rules
• DiffServ
• Hot Swap
• supports 2Mb packet buffer
• GVRP
Chapter 4 MI-7248PWR Specifications
39