Configuring The Mi-7248Pwr; Mi-7248Pwr Product Specifications; Table 14 Mi-7248Pwr Device Specifications - ZyXEL Communications ms-7206 User Manual

Chapter 4 MI-7248PWR Specifications
Table 13 MI-7248PWR LED Descriptions (continued)
LED
ACT
(Active)
ALM
Ethernet
Ethernet

4.3 Configuring the MI-7248PWR

See the MM-7201 User's Guide for details on configuring the MI-7248PWR.

4.4 MI-7248PWR Product Specifications

Table 14 MI-7248PWR Device Specifications

Dimensions
Device Weight
Interfaces
Ethernet Ports
Power Over Ethernet
(PoE)
Hi-G Ports
MAC Address Table
IP Address Tables
Routing Path
Max. Number of IGMP
Filter Profiles
Temperature
38
COLOR STATUS
Green On
Off
Red On
Off
Green On
Off
Blinking
Amber On
Off
396.6 (W) mm x 276 mm (D) x 42.5 mm (H)
2.1 kg
• One internal serial console port (RS232) for debugging purposes only,
internal access only
• 2 Out-of-Band Ethernet ports (connecting to the chassis back plane)
• 4 Hi-G ports (connecting to the chassis back plane)
• 48 switching Gigabit Ethernet ports with RJ-45 Ethernet connectors
(front panel)
Auto-negotiating: 100 Mbps or 1000 Mbps in either half-duplex or full-
duplex mode.
Auto-crossover: Use either crossover or straight-through Cat 5 Ethernet
(Cat 5 E) cables.
IEEE 802.3af PSE compliant
Up to 12 Gbps, 24 Gbps when paired.
Up to 16k entries
Up to 8k entries
64k
256
Operating: 0º C ~ 45º C
Storage: -10º C ~ 70º C
DESCRIPTION
The interface module is active.
The interface module is idle. When the management
module is removed or is not operating, the interface
module's default state is inactive.
The interface module is overheated and/or the voltage is
outside of the normal range.
The interface module is operating normally.
A 100/1000Base-T Ethernet link exists.
There is no link.
The 100/1000Base-T port is transmitting or receiving data.
POE is on.
POE is off.
MS-7206 Hardware Installation Guide