Mi-7248Pwr Specifications; Mi-7248Pwr Front Panel; Mi-7248Pwr Leds; Figure 8 Mi-7248Pwr Front Panel - ZyXEL Communications ms-7206 User Manual

C
H A P T E R

MI-7248PWR Specifications

This chapter describes the MI-7248PWR interface module.

4.1 MI-7248PWR Front Panel

The MI-7248PWR interface module has 48 1000Base-T RJ-45 ports that provide PoE (Power
over Ethernet). Use the MI-7248PWR with a MPC-7202 PoE power adaptor card and a MP-
7202 power injector. See
see Section 8.3 on page 62
The following figure shows the MI-7248PWR front panel. See
details on making the hardware connections.

Figure 8 MI-7248PWR Front Panel

4.2 MI-7248PWR LEDs

After you connect the power to the switch, view the LEDs to ensure proper functioning of the
switch and as an aid in troubleshooting.

Table 13 MI-7248PWR LED Descriptions

LED COLOR
PWR Green
PoE Green
SYS Green
MS-7206 Hardware Installation Guide
Section 7.5 on page 56 for how to install the power adaptor card and
for how to connect it.
STATUS DESCRIPTION
On The interface module is turned on.
Off The interface module is off.
On PoE power is ready.
Off PoE power is not ready.
Blinking The interface module is rebooting and performing self-
diagnostic tests.
On The interface module is on and functioning properly.
Off The power is off or the interface module is malfunctioning/
not ready.
4
Section 8.1 on page 59 for
37