Yeti Cycles dj 2012 Owner's Manual page 9

dropout systems
05. dropout adjustment
Tighten the two M8x22mm dropout bolts on the
drive side of the frame with a 5mm allen key.
repeat for the non-drive side.
Torque to 70-75 in/lb.
18.
06. dropout adjustment
Double check that the dropouts are square and
the rear wheel is centered in the frame. When
assembling the DJ for the first time it will be
helpful to set the chain stay to the desired length
before measuring and cutting the chain. This will
help ensure proper chain tension for the bicycle.
When making a large adjustment of the chain
stay length after the bicycle is assembled be
aware that a change to the chains length may be
necessary.
19.