Jump Starting - Chevrolet Enjoy Owner's Manual

9-46 Vehicle Care
Warning
Wheel nuts that are improperly or
incorrectly tightened can cause
the nuts to become loose or breakage
of bolts and cause the wheels to
become loose or come off. The wheel
nuts should be tightened with a
torque wrench to the proper torque
specification (90 Nm ~ 110 Nm) at
your CHEVROLET retailer work-
shop after self-replacing.
8. Check the tire pressure
9. Store the flat tire in the rear com-
partment following the "Installa-
tion Sequence" on page 9-41.
10. Have the tire fixed as soon as you
can. Reinstall it on the vehicle after
balancing.
TOOL PACKING STEPS
1. Place the wheel wrench and tow
hook into the specified tool kit bag.
2. Put the jack and jack handle into the
jack assembly bag.
3. Place the tool kit bag inside the jack
assembly bag.
4. Bundle up the jack and tool kit bag
tightly with the strap provided.
5. Store the jack and tool kit bag under
the third row seat and secure it in
their original position.
Warning
Storing a jack, a tire, or other equip-
ment in the passenger compartment of
the vehicle could cause injury. In a
sudden stop or collision, loose equip-
ment could strike someone. Store all
these in the proper place.

JUMP STARTING

JUMP STARTING

Caution
Do not try to start vehicle by pushing
or pulling it.
This can damage catalytic converter
and automatic transaxle and may
cause personal injury.
For more information about the vehicle
battery, see "Battery" on page 9-22.
If the vehicle battery has run down, you
may want to use another vehicle and
some jumper cables to start your
vehicle. Be sure to use the following
steps to do it safely.