Air Filter; Replacing Wiper Blades; Cleaning The Air Filter - Chevrolet Enjoy Owner's Manual

Do not use solvents, gasoline, kerosene
or paint thinners to wash the wipers.
These substances are corrosive and
could damage the wipers and painted
surfaces.
Caution
Do not run the wiper blades on
dry/dusty glass. Always spray
washer fluid from windshield nozzle
before switching on wipers.
The effectiveness of wipers will be
reduced by foreign substances on the
windshield and wiper blades such as
tree leaves, dust, sand, bird drop-
pings etc. Clean the glass to remove
foreign substances before using
wipers.
REPLACING WIPER
BLADES
Retaining clip
1. Press and hold the blade retaining
clip.
2. Remove the wiper blade from the
wiper arm.
3. Fit a new wiper blade onto the
wiper arm.
Vehicle Care 9-21

AIR FILTER

Inspect and replace the air filter/cleaner
element regularly according to the
maintenance schedule in this Manual.
Caution
The engine needs clean air to operate
properly.
Do not operate your vehicle without
the air cleaner element installed.
Driving without the air cleaner
element properly installed can
damage your engine.

CLEANING THE AIR FILTER

If the air filter is too dirty, clean it by
following steps:
1. Lightly tap and shake the air filter
(away from the vehicle) to release
loose dust and dirt.
2. Inspect the air filter for any damage
and replace it if damage is found.
3. Clean the inside of the housing.
4. Cover the housing with a damp
cloth while cleaning the filter.
Note
Do not clean the engine air filter with
water or compressed air.