Antilock Brake System (Abs) - Chevrolet Enjoy Owner's Manual

ANTILOCK BRAKE
SYSTEM (ABS)*
Your vehicle may be equipped with this
function.
The Antilock Brake System (ABS) is an
advanced electronic brake system which
helps to prevent slip and skidding. This
system can help to bypass obstacles
when braking suddenly and provide
maximum braking force on slippery
roads.
The ABS warning light will light
momentarily when the ignition switch
is turned to II/ON position. If the ABS
warning light stays on or lights during
driving, it indicates a problem with the
ABS.
Consult your CHEVROLET retailer for
necessary repair. See "ABS Warning
Light" on page .
5-22
The ABS system will monitor the speed
of each wheel during the braking
process. If one wheel has a tendency to
lock up, the system will control the
front and rear wheel brakes separately.
The brake pedal will usually vibrate
slightly with some noise when ABS is
working.
For optimum braking, keep the brake
pedal fully depressed throughout the
braking process, despite the fact that the
pedal is pulsating. Do not reduce the
pressure on the pedal.
Caution
ABS will not change the time needed
for braking, neither it will necessar-
ily shorten the braking distance.
Even if ABS is equipped, an
adequate braking distance should be
maintained.
Driving and Operating 8-21
FAULTS
Warning
If there is a fault in the ABS, the
wheels may be liable to lock due to
braking that is heavier than normal.
The advantages of ABS are no longer
available. During hard braking, the
vehicle can no longer be steered and
may swerve.
Have the cause of the fault remedied by
a CHEVROLET retailer.
USING ABS
Do not pump the brakes. Just hold the
brake pedal down firmly and let ABS
work. You might hear the ABS pump or
motor operating and feel the brake
pedal pulsate, but this is normal.