Windshield Washer Fluid; Adding Power Steering Fluid - Chevrolet Enjoy Owner's Manual

ADDING POWER STEERING
FLUID
MAX
MIN
1. Wipe and clean the cap and top
surface.
2. Remove the cap.
3. Add power steering fluid. The fluid
level should be kept between the
MIN and MAX marks.
4. Refit the cap.
Caution
Use of the incorrect fluid may damage
the vehicle and the damages may not
be covered by the vehicle's warranty.
Always use the correct fluid listed in
"Recommended Fluids and Lubri-
cants" on page 10-6 .
Warning
An overflow of the fluid may cause the
fluid to burn or discolor paintwork. Do
not overfill the reservoir.
An engine fire can cause personal
injuries and damage your vehicle
and other property.
Caution
Extremely small amounts of contami-
nation can cause steering system dam-
age and cause it to not work properly.
Do not allow contaminates to contact
the fluid side of the reservoir cap or
from entering the reservoir.
Vehicle Care 9-19
WINDSHIELD WASHER
FLUID
Before you drive, make sure the
windshield washer fluid reservoir is at
the appropriate level and filled with the
correct solution.
In cold weather, do not fill the
windshield washer fluid reservoir more
than three quarters full.
Washer fluid can freeze to expand in
cold temperature. Filling the reservoir
too much does not allow enough
expansion room to prevent possible
damage to the reservoir.