Motion Detection - D-Link DCS-5220 User Manual

Section 3 - Configuration
Once Motion Detection feature is enabled, users will be able to monitor three windows with different settings. This
allows your camera to serve as a security device that records only when motion is detected.
Enable motion Check this option to turn on the motion detection
detection: feature.
Window name: Create your own name for the monitored area/
window. It will show at the top of the motion
window.
Sensitivity: Set the measurable difference between two
sequential images that would indicate motion.
Percentage:
Set the amount of motion in the window being
monitored that is required to initiate a motion
detected alert. If this is set to 100%, this means that
motion must be detected within the whole window
to trigger a snapshot.
Note: Setting a higher sensitivity and a lower
percentage will make motion easier to be
detected.
New:
Click to add a new window. A maximum of three
motion windows can be opened simultaneously.
Use your mouse to drag the window frame to re-
size or the title bar to move. Clicking on the 'x' at
the upper right corner of the window will close the
window.
Save:
Save the related settings of that window.
D-Link DCS-5220 User Manual

Motion Detection

50