D-Link DCS-5220 User Manual page 40

Section 3 - Configuration
The accessibility of the RTSP streaming for the three authentication modes are listed in the following table.
Quick Time
player
Disable O
Basic O
Digest O
O indicates that the authentication mode is supported by the RTSP player.
X indicates that the authentication mode is NOT supported by the RTSP player.
Access name for stream 1 / Access name for stream 2 : The access name is used to differentiate the streaming source. When
using a RTSP player to access the Network Camera, and the video mode is set to MPEG-4, use the following RTSP URL command
to request a transmission of streaming data.
rtsp://<ip address>:<rtsp port>/<access name for stream1 or stream2>
For example, when the access name for stream 1 is set to live.sdp, the URL command is : rstp://192.168.5.121/live.sdp
1 : Launch a RTSP player.
2 : Choose File > Open URL. This opens the URL dialog box.
3 : Type the URL command in the text box.
For example:
4 : The live video will be displayed in your player.
D-Link DCS-5220 User Manual
Real Player VLC media
player
O O
O X
X X
mpegable pvPlayer
Player
O O
X X
X X
40